news | blog

Injection Packers, Injection Needles, Injection Lances

Do you have the right injection packers for your job?

SealBoss Injection Packers – Your Source Since 1988.

Injection Packers, Injection Needles, Injection Lances

The right injection packer will save you time.

You want easy installation, a tight fit & seal under pressure and a packer of suitable dimensions to connect your injection pump securely to the crack. A lot can go wrong once you fire up the injection pump and send resin on it’s way at over 1000 psi. At this point you really want the right packer.

We have been your leading packer source since 1988. We have a lot of experience with packers. You don’t always need the most expensive packer, not always the biggest nor the longest specimen.

But, sometimes you do!

We are here to help.

The right injection packer will save you money.

For questions, or additional application tips & tricks, give us a call at (714) 662-4445 or contact us here. Our Technical Reps will assist you with any needs you may have.

Packer Superstore

Click Here

Contact Your SealBoss ® Technician

SealBoss SLP Polymer Pump Systems

Polymer Pump Systems

For
Crack Injection,
Curtain Injection,
Compaction Grouting
Soil Stabilization
Slab Lifting

Signature Line Air-Powered Polymer Pumps

Design Cues

• Industrial Grade Lightweight Design
• Robust, Modern Steel Frames
• Advanced Piston Pump Systems
• Newly Designed Applicators

Range of Materials

• Polyurethane resin
• Polyurethane foam grout
• Epoxy Resin
• Aqueous solution

Advantages

• Extremely lightweight designs
• Robust, heavy duty components
• Large material passages for use of products with higher viscosities
• Piston seals do not require tensioning
• Easy maintenance and repair
• Pneumatic design

Four SLP Signature Pumps

The SealBoss SLP Pump Signature Line of single and multiple component, pneumatic reciprocating piston injection machines are newly developed, professional and purpose built heavy duty air-powered injection pumps. They complement our existing comprehensive line of pneumatic, electric and hand operated pumps.

In the following we point out some advantages of air-powered equipment. Our pneumatic pumps are easily maintained, highly reliable and very easy to use. Air flow is effortlessly controlled and our pumps perform very well at low and high rates of product flow. Our pumps feature relatively large internal clearances in the major fluid passages (i.e. large intake and discharge openings), that allow liquids of higher viscosities to pass.

Air-powered pumps have been highly developed to provide long-term reliability and durability even under difficult injection conditions. With the air-powered design there is inherently less mechanical load and wear on key components than with other designs. Long term durability is achieved by the relatively low-speed, high clearance nature of the moving parts. Air-powered pumps have a unique advantage in their ability to throttle back flow to meet changing site needs. Stop/start cycle limitations do not apply to these pumps, so no adjustments need be made when dispensing rates decrease; the air-powered pump will function as intended, at a reduced refill/discharge cycle rate. If pump output rate reduction is desired, the applied air pressure can be easily adjusted downward with the provided regulator.
With air-powered pumping systems, airlines are run to the pump instead of electricity, which provides immediate benefits in simplicity and safety. Pumps are delivered as a complete system, with all the necessary tubing, connectors and applicators.
Service is easy due to mechanical simplicity, lightweight and ease of handling. If pump operation is stopped due to clogging or back-pressure, typically no structural damage to the equipment occurs.

Conclusion

Air-powered pumps provide many advantages in injection applications equipment. A proven approach is to inform the pump supplier of the full conditions of the application and obtain a recommendation for the suitable equipment. It is important to research the quality, performance and suitability before selecting either an electric or air-powered pump.

SealBoss SLP 1C

SealBoss SLP 2C

SealBoss SLP 2C-5G High Output

SealBoss SLP 3C

SealBoss ® PUMPS

Click Here

Pumps

Contact Your SealBoss ® Technician

SealBoss Guideline Leak Seal Injection

Guideline - Leak Sealing Injection

This jobsite picture depicts one of the more challenging overhead leak sealing injection applications in a confined space with limited resources, very active water leaks and standing water in the structure. The contractor is using a button-head packer set-up for a secure and leak free connection of the hose to the injection packer. On the ceiling of the structure you can see previous injection points and cured foam that formed around the injected cracks while expanding and creating a compression seal. The contractor is covered in impervious protective clothing to protect himself from water and liquid product during the injection process. It is during jobs like this, when you appreciate a complete injection system that is proven, reliable and durable.

This is our compact guideline to waterproofing and leak sealing injection. From choosing product and equipment to job prep and the injection procedure itself, we cover many important product features and provide valuable information to assist you in making your application a successful one.

The SealBoss ® Leak Seal, Water Stop and Crack Injection Guideline

Contact Your SealBoss ® Technician

SealBoss Slab Lifting Pumps and Starter Kits

The SealBoss ® GT 2C-5G Cart System (pic left) is an affordable, portable for new and experienced contractors. The entire system can easily fit in the back of a pickup truck. The set up is simple and requires minimal equipment. Available with Generator/ Air Compressor Combo.

SealBoss ® IP GT 2C Pro Cart System Two Component Pump / Slab Lifting Pump Page

The SealBoss ® P3003 Portable System (pic right) is a low cost, extremely portable small job system for low volume injection for slab support with minimal or no lifting requirements.