Search

news | blog

Dual-Utility Urethane and Epoxy Pumps

Dual-Utility
Urethane and Epoxy Pumps

In an ever-evolving world, where people are often looking for one tool to handle multiple applications, it is very important to have these solutions in place to keep productivity at a maximum while not sacrificing any performance involving the task at hand.

The SealBoss P3003 is a Dual-Utility Urethane and Epoxy Pump capable of tackling industrial size jobs for either structural epoxy injection or polyurethane water stop foam injection.

A contractor in the Pacific Northwest recently received training on use of the Dual-Utility Urethane and Epoxy Pump SealBoss P3003 for structural epoxy injection.

Fast forward 5 months later, and the same team had a waterproofing injection application in a below grade parking structure warranting the use of a pump to convey the Polyurethane Water Stop Foam Resin SealBoss 1510.

“The key to having a group that can use this pump for both purposes is keeping it as clean as they possibly can” says Chris Coderre, Western Regional Manager.

The latest project included the injection of about 800 feet of cold joint where the wall of a below grade parking structure sat on top of the slab. Additionally, cracks in the wall showing signs of efflorescence were also going to be injected with  SealBoss 1510 Water Stop Foam. The material was catalyzed using SealBoss 15X Catalyst at a ratio of 10% by volume to 1510 foam resin.

The Packers used where the SealBoss 16-60s Steel Injection Packers.

A deciding factor to having a good comfort level with using the SealBoss P3003 for Polyurethane Injection is making sure to use the correct applicator attachment.

By using two different applicators — we supply is a specific applicator for structural epoxy and another applicator for polyurethane injection — you have the the ability to have one machine to tackle both kinds of projects.

The other item that needs to be understood by all members of the team is the idea that when injecting polyurethane, while the pump will dispense the A side twice as fast as the B side, it makes no difference as long as the original batch feeding both of the Hoppers is the same.

Paramount for being able to have this machine at the ready so it can perform both scopes is the cleaning. By running a xylene cycle through it and then following up with the SealBoss R70 Pump Flush, you can be confident that your ability to toggle between structural epoxy injection and polyurethane water stop injection will be there.

For any questions regarding the proper use of this machine or any others, please contact your regional representative at SealBoss to learn more about the advantages of this robust line.

Call Your SealBoss ® Injection Technology Specialist

If you have any questions on chemical injection grouting with polyurethane and epoxy resisns or any related applications, please contact our team of qualified SealBoss grouting repair representatives to schedule an on site consultation & full systems training. Call us at 714-662-4445.

Contact Your SealBoss ® Technician

SealBoss SLP 2C Crack Injection Pump

Pneumatic Injection Pump

SealBoss SLP 2C Crack Injection Pump

Signature Line Pneumatic Two Component Polyurethane Crack Injection Pump

Our SLP series crack injection pumps are specifically designed for chemical grout injection without any compromises.

Crafted from high quality components, and with impeccable attention to detail, functionality and aesthetics, the SLP pumps provide industry leading performance, durability and practicality.

This sturdy and professional multi use injection pump earned the moniker ‘Suitcase Pump’ from its lightweight, convenient and protective frame which outlines are reminiscent of a suitcase or briefcase.

This compact pneumatic machine is much more than just a crack injection pump. It has been engineered to pump two component as well as single component polyurethane products for crack injection, soil compaction, void filling and smaller slab lifting applications.

This pump is set to a 1:1 mixing ratio by volume. Product is fed directly from the product containers via suction tubes. We deliver the pumps as a complete system, with all the necessary tubing, connectors and applicators.

The Advantages of Air Powered Crack Injection Pumps

Air-powered pumps are sought after for their long-term reliability and durability. Stop/start cycle limitations do not apply to these pumps and no adjustments need be made when dispensing rates decrease.

To reduce pump output rate, simply adjust the air downward at the regulator. With air-powered pumping systems, no electricity is fed into the machine, which provides immediate benefits in simplicity and safety.

Product Page

Please take a look at the SealBoss SLP 2C crack injection pump product page.

Contact Your SealBoss ® Technician

SealBoss SLP 2C-5G Injection Pump

SEALBOSS SLP 2C-5G Injection Pump

Signature Line High Volume Two Component Pump

Take a Closer Look at this High Volume Injection Pump for Void Filling, Large Crack Injection Jobs & Slab Lifting

This professional pneumatic machine (shown above with optional flush pump mounted) is designed to pump two component as well as single component polyurethane products for large volume injection jobs. The SLP 2C-5G is used for slab lifting, soil compaction and curtain/bladder injection applications in tunnels or dams. This pump achieves a very high flow rate up to 5 gallons per minute and is set at a 1:1 mixing ratio by volume. Product is fed directly from the product containers via suction tubes.

The SLP 2C-5G, AKA ‘The Pig’

This large professional injection machine earned the moniker ‘The Pig’ from its nothing short of brutish performance and heavy duty appearance. Don’t be fooled by its nickname, this pump is a refined machine. Designed by experienced engineers, purpose built and made from highest quality materials.

The Advantages of Air Powered Pumps

Contractors appreciate Air-powered pumps for their long-term reliability, durability and ease of use. To reduce pump output rate, you simply adjust the air downward at the regulator. With air-powered pumping systems, no electricity is fed into the machine, which provides immediate benefits in simplicity and safety.

Watch the Short Video

Please take a look at our short video introducing the SealBoss SLP 2C-5G.

SealBoss SLP Polymer Pump Systems

Polymer Pump Systems

For
Crack Injection,
Curtain Injection,
Compaction Grouting 
Soil Stabilization
Slab Lifting

Signature Line Air-Powered Polymer Pumps

Design Cues

•  Industrial Grade Lightweight Design
•  Robust, Modern Steel Frames
•  Advanced Piston Pump Systems
•  Newly Designed Applicators

Range of  Materials

• Polyurethane resin
• Polyurethane foam grout
• Epoxy Resin
• Aqueous solution

Advantages

• Extremely lightweight designs
• Robust, heavy duty components
• Large material passages for use of products with higher viscosities
• Piston seals do not require tensioning
• Easy maintenance and repair
• Pneumatic design

Four SLP Signature Pumps

The SealBoss SLP Pump Signature Line of single and multiple component, pneumatic reciprocating piston injection machines are newly developed, professional and purpose built heavy duty air-powered injection pumps. They complement  our existing comprehensive line of pneumatic, electric and hand operated pumps.

In the following we point out some advantages of air-powered equipment. Our pneumatic pumps are easily maintained, highly reliable and very easy to use. Air flow is effortlessly controlled and our pumps perform very well at low and high rates of product flow. Our pumps feature relatively large internal clearances in the major fluid passages (i.e. large intake and discharge openings), that allow liquids of higher viscosities to pass.

Air-powered pumps have been highly developed to provide long-term reliability and durability even under difficult injection conditions. With the air-powered design there is inherently less mechanical load and wear on key components than with other designs. Long term durability is achieved by the relatively low-speed, high clearance nature of the moving parts. Air-powered pumps have a unique advantage in their ability to throttle back flow to meet changing site needs. Stop/start cycle limitations do not apply to these pumps, so no adjustments need be made when dispensing rates decrease; the air-powered pump will function as intended, at a reduced refill/discharge cycle rate. If pump output rate reduction is desired, the applied air pressure can be easily adjusted downward with the provided regulator.
With air-powered pumping systems, airlines are run to the pump instead of electricity, which provides immediate benefits in simplicity and safety. Pumps are delivered as a complete system, with all the necessary tubing, connectors and applicators.
Service is easy due to mechanical simplicity, lightweight and ease of handling. If pump operation is stopped due to clogging or back-pressure, typically no structural damage to the equipment occurs.

Conclusion

Air-powered pumps provide many advantages in injection applications equipment. A proven approach is to inform the pump supplier of the full conditions of the application and obtain a recommendation for the suitable equipment. It is important to research the quality, performance and suitability before selecting either an electric or air-powered pump.

SealBoss  SLP 1C

SealBoss  SLP 2C

SealBoss  SLP 2C-5G High Output

SealBoss  SLP 3C

Contact Your SealBoss ® Technician

Popular Posts
More Posts
Archives
Categories
Scroll to Top