Wet Basement Solutions

Wet Basement Leak Sealing with Injection System

Do You have Water Leaks in Your Basement?

Prevent mold development and other problems from occurring by using the SealBoss polyurethane foam injection system to seal cracks and joints in your basement walls and foundation.

A damp and leaky basement not only emits an unpleasant odor but also threatens to reduce the value and livability of your home. Moisture in the basement creates an ideal environment for mold growth and can contribute to the deterioration of foundations, walls, and floors.

Neglecting to seal cracks and joints can have severe consequences as it enables water to penetrate the structure, propelled by both hydrostatic pressure and capillary action. Capillary action is the phenomenon of water being pulled up through a substrate by cohesive and adhesive forces. Water that rises through capillary action also transports minerals and salts, which can contribute to greater degradation of the structure. It’s crucial to address and seal any cracks and joints in order to prevent these harmful effects from taking hold.

The SealBoss polyurethane foam injection system is an effective and reliable solution to repair water leaks in basements.

One of the main advantages of using the SealBoss system is its ability to penetrate and fill even the smallest cracks and voids in the concrete, effectively sealing off any potential water intrusion points.

The SealBoss system is a non-invasive solution, meaning that it does not require any major excavation or demolition work. This makes it a cost-effective and time-efficient solution, with minimal disruption to the homeowner’s daily routine.

Furthermore, the SealBoss wet basement solutions system provides a permanent solution to the problem, unlike temporary solutions such as surface sealants and waterproofing paints. The foam is resistant to water, mold, and mildew, providing long-lasting protection against future water leaks and moisture-related problems.

Overall, the SealBoss polyurethane foam injection system is an effective, non-invasive, and long-lasting solution to repair water leaks in basements, providing homeowners with peace of mind and protection against potential water damage.

Residential Wet Basement Solutions – Polyurethane Injection

Sealing Basement Leaks with Polyurethane Foam Injection System

Scope

A SealBoss-certified contractor based in St. Louis was requested to repair actively leaking basement cracks in a residential property during heavy rainfall.

Wet Basement Solution – Detail

Based on a comprehensive inspection and assessment of the jobsite and considering the width of the crack, it was concluded that drilling a hole directly over the crack at a 90 degree angle and all the way through the wall would be necessary.

This method was considered the most effective way to permanently seal the crack. It involved a combination of crack injection and curtain injection procedures. The injection process allowed for the product to flow from the dirt side of the structure, which is known as the positive side, back through the crack to the inside of the structure, while sealing the crack completely.

The injection on the blind side resulted in a buildup of the hydrophobic resin, creating a curtain on the positive side of the wall. The injection process created a barrier, which subsequently caused the pressure buildup to push the resin back into the crack itself. This sealing process effectively sealed the crack and any fissures present in the process.

Materials and Tools Used

The preferred products for the job were SealBoss 1510 and SealBoss 15X Accelerator. To speed up the reaction, the SealBoss 15X accelerator/catalyst was incorporated into the resin at a volume ratio of 10%.

Injection packers were set along the crack, roughly twelve inches apart.

The injection process utilized the P2002 compact high pressure injection pump along with Evolution 13-100AL ½” packers to inject the polyurethane foam resin.

A quantity of approximately one gallon of material was utilized for each six lineal feet of the crack.

Links

Repair Kits

Related Articles

Learn More

If you have any questions, please feel free to contact us at 714-662-4445, or you can request to be contacted by filling out a form on our website. Our team of experienced technical representatives is available for on-site support upon request, and we are committed to helping you find the best solution for your needs.

You may want to consider exploring our selection of Wet Basement Solution Leak Sealing and Crack Repair Kits, and Small Repair and DIY Kits , designed to address wet basement repair and related crack injection repair applications.