On The Job
Private Road Repair | SealBoss 6060 QuickFix Fast Setting Polyurethane
SealBoss Technical Rep On the Road
Roads can crack and settle over time from a multitude of environmental factors.
If your street is a private road, the city is not responsible for the repair or maintenance and that responsibility falls on the residents of that private development.
Having a quick and efficient way to do these repairs when they come up is key, while still being able to respect the resident’s privacy with minimal disruptions.
SealBoss 6060 Spall & Crack Repair QuickFix is a self-leveling repair material to which sand can be added for strength, anti skid properties and aesthetics.
SeaBoss 6060 takes only about five minutes to fully cure at ambient room temperature. The product cures in temperatures down to -20 degrees Fahrenheit. Lower temperatures will increase cure times.
To prep surface cracks for the repair a V-notch blade should be used to chase the cracks and then thoroughly cleaned out of small rocks and any other debris and organic matter. For best results the cracks must be dry — if moisture is present a propane torch may be used to dry the area.
Once crack is prepped and the material is conditioned, you can begin applying SealBoss 6060 QuickFix to the crack. After about a minute you can then broadcast sand into the curing material.
Doing this allows for a non-slip surface as well as a salt and pepper finish to help blend the repair.
SealBoss 6060 QuickFix is available in 22oz cartridges (see pictures below) as well as in bulk in pails, drums and totes. The SealBoss Road Repair System is shown here to repair concrete road cracks.
The SealBoss JointMaster 2 G3i Joint Fill Pump (see picture below in the background) is the recommended equipment for larger applications and potholes and repairs of blacktop / asphalt / bitumen finished roads.
Private Road Repair – Lincoln, Nebraska
“We Provide Field Service When You Need It!
We have been offering experienced and responsive technical support since 1988. While providing on-site support and training, I create a positive learning environment focusing on building applicator confidence allowing for successful repairs to be continued after the training. From training new companies and their employees, SealBoss has continued to provide support to our clients for over 32 years.
On-site training consists of an overview of products, the equipment and it’s features. This is followed by hands on training with actual dispensing of material on the job site until the applicator has gotten confident with the application techniques and nuances of the material used. Finally we focus on the correct cleaning procedure of the equipment.
I won’t leave a jobsite till I know everyone is comfortable with the systems and can reteach the next person in line.
With a knowledgeable technical support team, we are here to help with any questions you may have”
