SealBoss 1503 Foam Resin
Hydrophobic Wet & Dry Reactive Polyurethane Resin | Foam
Chemical Injection Grout
Advanced Polyurethane Foam Resin For Wet & Dry Environments
- Fast Curing With and Without Water
- Fast Sealing Foam Structure Upon Contact With Water
- Low viscosity, Flexible After Cure
- Universally Applicable
- Fast Curing – Permanent Seal
- For Professional Use Only
SealBoss 1503 Foam Resin Applications
- Defective Concrete (Cracked or Honeycombed)
- Concrete Construction Joints & Cracks
- Brick Construction, Geo Formations
- Pipe Intrusions
- Waste Water Tanks, Water Reservoirs
- Tunnels, Dams, Soil Stabilization
- Sewers, Manholes, Utility Boxes
UNITS: 5 GAL, DRUMS, TOTES
Product Description
SealBoss 1503 Foam Resin is a Flexible Hydrophobic Foam and Resin Combination Product.
Dry:
In a dry environment the material will behave like a low viscosity resin and cure to a flexible non cellular sealant.
Wet:
When in contact with water the product will react like a hydroactive polyurethane foam and expand and cure to a flexible foam. Since water is not a component of the cured product’s structure, the applied material is essentially not effected by water or dryness. The reacted material does not shrink or swell. The MDI polyurethane based resin is 100% solvent free and 100% solids. Due to the low viscosity of the material, SealBoss 1503
Foam Resin offers superior penetration in hairline crack injection. The product is suitable for the filling of spaces, cracks and honeycombing in stone or concrete structures. Ask your SealBoss® technician for details. The product is for professional use.
Installation Guidelines
SealBoss 1503 Foam Resin is an extremely versatile leak seal product as it can be applied in wet, damp and completely dry environments. Continue the injection until resin leaks out from the cracks and/or from the adjacent packers. This is necessary to get an even material distribution. All equipment, pumps and hoses however must be dry. Avoid moisture contact with the mixture to prevent premature reaction. If product foams while pumping, immediately shut down the machine and flush with a cleaner to avoid built up and clogging of the equipment.
