SLP 2C - 5G Two Component Injection Pump
High Output Pneumatic Two Component Pump
for Injection and Void Filling Applications
Operation
- Pneumatic
- 2 Component polyurethane grouts
- Convenient rolling cart
- High quality construction
Applications
- Curtain Injection
- Consolidation grouting
- Water control grouting
- Permeation grouting
- Compaction grouting
- Void filling / Slab lifting
- Crack injection
Product Description
The SealBoss ® SLP 2C-5G is a heavy duty two component, pneumatic reciprocating piston injection machine in our signature line of professional and purpose built polyurethane injection pumps.
This pump is set to a 1:1 mixing ratio by volume. Product is fed directly from the product containers via suction tubes.
The relatively low purchasing cost paired with the high output volume makes this pump suitable for under slab void filling with a void filling and lifting foam such as SealBoss 1640. Please be advised that depending on ambient and substrate conditions, SealBoss 1640 foam may need to be temperature conditioned prior to use. Please consult with your SealBoss technician for details.
Our pneumatic pumps are easily maintained, highly reliable and very easy to use. Air flow is effortlessly controlled and our pumps perform very well at low and high rates of product flow. Our pumps feature relatively large internal clearances in the major fluid passages (i.e. large intake and discharge openings), that allow liquids of higher viscosities to pass.
Air-powered pumps have been highly developed to provide long-term reliability and durability even under difficult injection conditions. With the air-powered design there is inherently less mechanical load and wear on key components than with other designs. Long term durability is achieved by the relatively low-speed, high clearance nature of the moving parts. Air-powered pumps have a unique advantage in their ability to throttle back flow to meet changing site needs. Stop/start cycle limitations do not apply to these pumps, so no adjustments need be made when dispensing rates decrease; the air-powered pump will function as intended, at a reduced refill/discharge cycle rate. If pump output rate reduction is desired, the applied air pressure can be easily adjusted downward with the provided regulator.
With air-powered pumping systems, airlines are run to the pump instead of electricity, which provides immediate benefits in simplicity and safety. Pumps are delivered as a complete system, with all the necessary tubing, connectors and applicators.
