Injection Packer Brass 10-105B
3/8" x 4" | 10mm x 105 mm | Longer Crack Injection Port
The 3/8 inch diameter SealBoss 10-105B Type Injector is a small brass type mechanical packer equipped with a with a zerk fitting. This is brass type mechanical injection packer is recommended for professional crack injection where smaller drill holes are required without compromising on packer quality and injection pressures. This longer packer with two rubber seals is designed for steep angle drilling and deteriorated substrates.
BRASS MECHANICAL INJECTION PACKER
BRASS
Dimensions
3/8″ x 4″
10 x 105mm
Longer Packer for Steep Angle Drilling and Deteriorated Substrates
Bottom anti-return valve permits removal of head prior to patching drill holes. Only small diameter drill holes needed. Suitable for PU, EP, and Silicate grouts.
STEEL
High Quality Steel Zerk Coupler for Zerk Type Mechanical Packers and Ports for secure connection
The secure fit SealBoss ZC Zerk Coupler for zerk type mechanical packers and ports. This zerk fitting coupler is made from steel and equipped with 4 (four) steel claws/prongs/jaws.
Hose Sets | Valves | Accessories
SealBoss Hose Sets
Dimensions
Standard lengths
3m / 9 ft
5m / 15 ft
10m / 30ft
How to Securely Connect Your Pump to The Injection Packer
Equip your injection pump with high quality, pressure tested and approved injection hose sets. Sets include premium pressure hoses, connectors, valves, flexible extension hoses and couplers to securely connect to your packer system.
