SealBoss 2400 SealGel SLV Acrylate Gel

Product Description

SealBoss 2400 SealGel SLV Acrylate is  an environmentally  friendly, super low viscosity, two component hydrophilic poly acrylate gel with accelerator. The product offers outstanding penetration properties similar to plain water. The SealBoss 2400 SLV Acrylate  flows extremely well into the finest cracks and fissures thereby sealing hairline cracks and  porous  structures such as masonry, cementitious grouts, blocks and brick. The product is suited for curtain / bladder  injection by sealing along the structure as well as solidifying the soil in the proximity of the structure.

Areas of application are numerous including the sealing of tunnels, shafts and canal systems, retaining  and structural walls ,  expansion joints, cold joints and cracks. Uncured product can be flushed with water. The product is for professional use.

Properties

SealBoss 2400 SLV Acrylate is a high-grade, polyacrylic, ultra low viscosity injection gel with excellent sealing qualities. The material is characterized by its high flexibility, strength and tolerance for movement. The gel can be adjusted for reaction times from approximately 15 seconds to several minutes at room temperature. At 68°F / 20° C and standard adjustment (5% of powder B in water, by weight ), SealBoss 2400 SLV Acrylate will flow freely for approx. 25 seconds after mixing and will be fully gelled after approx. additional 50 seconds. This standard gel time allows for an excellent material distribution and an ideal spreading rate in most applications. To meet specific jobsite needs, the gel time can be adjusted by a wide range by adding more or less of the component B powder to the water side of the batch. Higher ambient and product temperatures accelerate the reaction time, lower temperatures slow it down. Please see the table at the end of this data sheet for detailed gel time data. SealBoss 2400 SLV Acrylate reacts to form a waterproof, flexible, but solid gel with outstanding adhesion to dry and wet mineral surfaces. In a moisture-vapor saturated environment the material remains stable in volume. In the case of alternating dry and wet periods, the gel will shrink and swell reversibly. The cured gel is insoluble in water and hydrocarbons and resistant to diluted acids and alkalis as well as to most salts frequently found in concrete structures. SealBoss 2400 SLV Acrylate has good resistance to alternating freeze and thaw cycles.

Videos

Tunnel Injection in High Hydrostatic Pressure Conditions
Tunnel Injection – Installing Button Head Packer for 2400 Acrylate Gel Injection